MOTERLINE

최고품질의 제품을 만족스러운 가격으로 신속하게 고객여러분께 공급하고자 노력하고 있습니다.

home>제품소개>ROBOTS >TOSHIBA

Large-size SCARA Robot THL 800, 900 and 1000

Large-size SCARA Robot THL 800, 900 and 1000
Large-size SCARA Robot THL 800, 900 and 1000

Large-size SCARA robot THL series with arm lengths of 800, 900 and 1000mm.

These SCARA robots were developed under the concept of low cost,

lightweight and energy saving.

※ 다운로드 받으신 PDF 파일이 안 보이신다면? Adobe Reader를 다운받으세요!

AdobeAdobe Reader Download
제품 상세정보

 제품 상세 설명

 

- Low cost

Impressive performance at affordable proces.

 

- Light-weight

Maximum weight reduction of about 60% has been achieved in comparison with our current.
Models Capable of reducing environmental impact.

 

- Energy-efficient

Maximum power consumption reduction of about 70% has been achieved in comparison with our current models.
Low-power consumption robot ideal for energy conservation era.

 

 

Specifications

 

Model THL800 THL900 THL1000
Type Horizontal multi-joint
No. of controlled axes 4
Arm Length 800mm (350mm + 450mm) 900mm (450mm + 450mm) 1000mm (550mm + 450mm)
Range of Motion First axis ±125°
Second axis ±145°
Third axis (Z-axis) 0~300mm
Fourth axis (Z-axial rotation) ±360°
Maximum Speed*1 First axis 187.5°/s
Second axis 217.5°/s
Third axis (Z-axis) 2000mm/s
Fourth axis (Z-axial rotation) 1700°/s
Composite speed 4.3m/s 4.6m/s 5.0m/s
Standard Cycle Time(with 2kg load)*2 0.47s 0.48s 0.48s
Maximum payload 10kg(Ratings :2kg)
Allowable end moment 0.2kg·m2
Position Repeatability*3 X, Y (plane surface) ±0.02mm
Z-axis (vertical) ±0.015mm
Fourth axis (Z-axial rotation) ±0.007°
Input Signal for Hand 8 inputs, 8 outputs
Hand pneumatic joints*4 φ6×3
Position Detection Method Absolute encoder mode
Robot controller cable 3.5m
Power capacity  1.4kVA
Total Weight 33kg 35kg

37kg


*1: Acceleration/deceleration rates may be limited according to the motion pattern, load mass and amount of offset.
*3: Horizontal 300mm, vertical 25mm, round-trip. Continuous operation is not possible beyond the effective load ratio.
*2: When the environment temperature is constant 20℃. Positioning repeatable accuracy in one-direction movement.Not absolute positioning accuracy.
*4: Pneumatic joints are provided on the base. Please refer to the drawings for the details of the pneumatic joints. Pipes to be are provided by the customers.

인쇄하기목록으로

↑TOP